Fitting Drives to the Upper Side of the Drive Tray
The upper side of the drive tray can accommodate a maximum of 3 x 2.5" drives or if you have the optical version of the FC9, 1 x 2.5" drive + 1 slimline optical
drive. As with the 3.5" mounting, the upper 2.5" drives use slots instead of fixed holes, to allow the drive to be fitted anywhere along the tray. The drives are secured
to the tray from below using 4 screws per drive.
If you have the OPTICAL version of the FC9, secure the optical drive to the drive tray with the 4 screws as shown, but DO NOT fully tighten the screws. Only after
you have closed the drive tray back into the case should these screws be tightened as you will need to adjust the position of the drive to line up with the front of the
case.
14
TC-M3x3
TC-M3x4
2.5" Drive
Optical Drive
2.5" Drive
