Stratus U916 E1, Installation Manual

Page: 40 / 76

Removing a U916 PCI Card
2-16 U916 T1/E1 PCI Card Installation Guide (R761)
9. Store the PCI card in a static-protective envelope to avoid damaging it.
10. Install the filler panel that covers the opening in the rear of the card cage frame.
Then, close the retainer bar that secures the PCI card to the card cage frame and
tighten the thumbscrews (see Figure 2-11). If you are replacing the PCI card with
a new card, see the ‘‘Installing a U916 PCI Card” section in this chapter now. If not,
proceed to the next step.
11. Close the card cage door. When you close the door, power is restored to the card
cage.
12. If you are replacing the PCI card, you must now enable it. See HP-UX Operating
System: Fault Tolerant System Administration (MAN0004) or (R1004H) for more
information.