Copyright
Copyright © 2018 Stratasys Ltd. All rights reserved.
This documentation contains proprietary information of Stratasys Ltd. This information is
supplied solely to assist authorized users of this Stratasys 3D printing system. No part of
this document may be used for other purposes, and it may not be disclosed to other parties.
The specifications on which this document is based are subject to change without notice.
No part of this book may be reproduced in any form or by any means, nor stored in a database
or retrieval system, without prior permission in writing from Stratasys Ltd.
If this document is distributed as a PDF file, you may print it for internal use.
April 2018
DOC-09669 Rev. H
Trademarks
The following are registered trademarks of Stratasys Ltd.: Stratasys
®
, Objet
®
, FullCure
®
.
All names of products and services cited in this book are trademarks or registered
trademarks of their respective companies.
Feedback
If you have any questions or comments about the way information is presented in this
document, or if you have any suggestions for future editions, please send a message to
.
DOC-09669 Rev. H