Electrical Requirements
The customer is responsible for ensuring that all tasks described in this section are performed by
qualified personnel.
Power
A stable, reliable source of power is required. Power to the UPS (or printer) should be supplied directly
from the main electrical panel. Other electrical outlets should not be connected to the line.
Printer power rating:
•
100–120 VAC, 50–60 Hz, 14 A, 1 phase
•
220–240 VAC, 50–60 Hz, 7 A , 1 phase
Printer short circuit rating: 1000 A
If the power at the facility does not support the above specifications, contact your Stratasys
specialist.
Important:
The diagram below shows the required connection to the power socket. Make sure
that the electrician sees this before installing the printer.
Figure 3 Connection diagram
Grounding
The printer is grounded through a single-phase, AC plug. Make sure that the AC outlet is properly
grounded, in accordance with local electrical codes.
Eden260VS
Electrical Requirements
12