Environmental Conditions
Temperature and Humidity
The temperature and relative humidity around the printer must be maintained within certain limits.
Peak conditions occur when the printer and the server workstation draw maximum electrical power,
resulting in the heat dissipation listed in the table below.
Table 5 Heat dissipation (peak conditions)
Heat Dissipation
Printer
1500 W (5140 BTU/hr)
Server workstation
450 W (1530 BTU/hr)
Total
1950 W (6670 BTU/hr)
The room temperature and relative humidity should not exceed the limits listed in the table below.
Range
Temperature
18°C to 25°C (64.5°F to 77°F)
Relative humidity
30%–70% non-condensing
Table 6 Room temperature and relative humidity specifications
Air Quality
To ensure optimal air quality around the printer, a connection to an external ventilation duct is
recommended (see
"Accessories and Utilities"
on the next page
). Otherwise, the room ventilation
system should change the air at least four times every hour.
Noise Level
The noise level around the printer is typically less than 65 dB during printing.
Eden260VS
Environmental Conditions
16