General safety regulations
All machines with rotating tools or details can cause accidents. It is therefor
important that you as an operator are aware of those risks for any accident and that
you avoid all possibilities for accidents.
•
Always use such clothes and personal equipment so you cannot get caught by
rotating tools.
•
Always use protective goggles if there exist a risk for chips or splashes from the
coolant. Follow local instructions if existing.
•
Keep it clean around the machine to avoid to stumble against rotating tools.
•
See to it that the work piece is securely fastened at the table. Never use your hand
to hold the work piece.
•
See to it that the switch is in the 0 position when changing tools or when cleaning
the machine.
•
Never brush away chips while the machine is operating.
•
Use faultless tools and the correct speed and feed for the tool. Be sure that the tool
is the correct one for you operation.
•
See to it that the drill head and the table are thoroughly damped before starting up
the machine.
Installation
•
Avoid to install the machine in a humid, dirty or badly illuminated environment.
•
Be sure that the machine possesses all necessary protections.
•
Electric installations have to be executed by a qualified electrician.
•
Be sure that the machine is staedly put up and positioned.
Using
•
Never use the machine if it lacks necessary protections.
•
Follow applicable regulations for use of machine regarding, personal protective
equipment.
•
Do not operate the machine with loose clothes or juwelleries. Use hair-net if
necessary.
•
Never strech yourself over the machine when it is running.
•
Never leave the machine when running.
•
Always stop the machine when not in use.
By service and maintenance
•
See to that the current is disconnected.
•
Always follow the instructions in this manual.
•
Do not modify the machine without contacting our dealer.
13