Strand VISION.NET User Manual Download Page 14

User ManUal

w w w. s t r a n d l i g H t i n g .co M

Vision.net Hardware   

14

5  

VIsIOn.neT GaTeWaY 

Vision.Net Gateway, Gateway Module - DMX/RDM Interface (4 port) and Gateway Module - RS485 Interface (1 

port) configuration instructions can be found in the Vision.Net Gateway Operation manual available for down-

load on our website.

Refer to the product quickstart guides for complete installation instructions. Power requirements are listed 

below.

2-450400-010

8

Vision.net gatewaY

QUicK start gUide

installation and set UP

Power reQUireMents

The Vision.net Gateway module may be powered via either a Power over Ethernet Plus (PoE) supply or from an 

external DC power supply connected via a set of screw terminals.  DC and PoE power connections are not intend-

ed as a redundant power solution. A CR1225 backup battery (pre-installed) is used for the real-time clock.
External modules are powered through a DIN rail bus system from the Gateway module.

MoUnting / installation

WARNING

: Do not power the system until all modules are placed and connect-

ed as described in the step below.

To mount Vision.net Gateway and other modules:

Step 1. 

Unpack module(s), taking precautions against ESD.

Step 2. 

Place the DIN rail bus connector into the DIN rail.

Step 3. 

Mount Vision.net Gateway module on DIN rail, taking care to orient 

the modules as shown. Take special care aligning, to prevent bend-

ing the pins.

•  If used, mount accessory modules (same procedure as Step 3), 

sliding them up against Vision.net Gateway module to ensure 

good contact.

•  Place end-caps on the DIN rail bus to prevent dust contamina-

tion on the pins.

oVerView

This document provides installation and operation instructions for the following product(s):

PRODUCT NAME

ORDER CODE

Gateway - main module

65710

PoE APPROVED POWER SUPPLIES

Planet Technology

PoE-171A-60

Planet Technology  

PoE-173

Phihong

POE60U-1BT

Phihong               

POE90U-BT

(Fully compliant)

24V APPROVED POWER SUPPLIES

Meanwell

MDR-60-24

WaGO

787-712

Poe reQUIreMenTs

PoE PSE TYPE

DESCRIPTION

Gateway standalone

802.3af

12W @ the gateway

Summary of Contents for VISION.NET




















Reviews: