USER MANUAL
CONTACT LIGHTING CONTROL PANEL
WWW. ST R A N D L I G H T I N G .CO M
4
CIRCUIT BREAKER MODELS (MLO - MAIN LUG ONLY)
Some models of the Contact Low Voltage Lighting Control Panel include internal branch circuit breakers. In this
case, a breaker access door is included on the front panel. MLO option is only available on the following models:
MODEL
DESCRIPTION
VOLTAGE
76921C
Relay Insert Panel with breakers, 24-way
120V
76922C
Relay Insert Panel with breakers, 36-way
120V
76923C
Relay Insert Panel with breakers,48-way
120V
76931C
Relay Insert Panel with breakers, 24-way
277V
76932C
Relay Insert Panel with breakers, 36-way
277V
76933C
Relay Insert Panel with breakers,42-way
277V
FIGURE 2.
LIGHTING CONTROL PANEL WITH INTERNAL CIRCUIT BREAKERS
NOTE
: The 24-Circuit Breaker Panel is shown in this example, however, components are typical for all breaker
models.
INSTALLATION OVERVIEW
The following steps are required to successfully install this product:
Step 1.
Review this document completely before starting the installation.
Step 2.
Unpack and inspect equipment. Compare the equipment you received with your packing list. If these
do not match, contact Strand Lighting Customer Service at 1-214-647-7880.
Step 3.
Gather tools. Refer to Tools List below.
Step 4.
Choose an appropriate location for installation. Refer to Locations and Clearances below.
Step 5.
Plan the wire routings and connection order. Decide where the Feed, Load, and Control wiring will
FRONT PANEL
INTERIOR VIEW
1
2
1)
2)
3)
4)
Breaker Access Door
Breakers
Circuits 1-12
Circuits 13-24
3
4
