USER MANUAL
CONTACT LIGHTING CONTROL PANEL
WWW. ST R A N D L I G H T I N G .CO M
10
MENU SYSTEM
To navigate the menus, press the four navigation buttons as required. When the desired menu is reached, press
[Enter] to display the menu options. Use navigation and [Enter] buttons to view status and confi gure RCM pro-
cessor. The menu system consists of several main categories as shown below:
LCD Menu Structure
SYSTEM STATUS
(status information shown, no user-selectable options)
SUB MENU
OPTIONS
COMMENTS
Name
N/A
Displays assigned name of relay panel as programmed by user.
Location
N/A
Displays assigned location of relay panel as programmed by user.
Serial
N/A
Displays relay panel serial number.
Type
N/A
Displays type of relay panel.
Relay Status
N/A
Displays current status of the selected relay as assigned by the user.
Relay Present
N/A
Displays which preset a relay is assigned to.
Relay with Errors
N/A
Displays the number of relays with an error.
Firmware
N/A
Displays Processor’s current
fi
rmware version as: 86XXXX vX.XX
RELAY STATUS
(status information shown, no user-selectable options)
When
fi
rst viewing the this menu, the current status of Relay 1 will be displayed. To view the current status of other relays, press the
right-arrow button to increment by 1. For example, pressing the right-arrow button will advance to Relay 2, pressing it again will
advance to Relay 3, and so on.
SUB MENU
OPTIONS
COMMENTS
Relay
N/A
Displays relay name and number as assigned) programmed by user).
Output %
N/A
Displays 0 (off) to 100% (on)
Status
N/A
Displays if Normal or Local control.
Errors
N/A
Displays any relay errors.
Module
N/A
Displays relay rating (2400 W)
Version
N/A
Displays
fi
rmware version.
Continued on next page
MAIN MENU
System Status
Relay Status
Relay Inputs Config
System Configuration
Walk Around Programming
POWER
FAULT VISION.NET DMX
ESCAPE
