13
3. A few seconds after the last touch of the slider, the minute
minder duration time is accepted and starts to count down.
4. When the minute minder duration time has elapsed, the buzzer
will beep for 30 seconds and the time display shows “--”.
Setting the timer to turn off one cooking zone at a time
1. First select the relevant heating zone by touching the heating zone
selection control, and select the required power level with the
slider.
2.
While the heating zone selection indicator is flashing, touch the
timer control key. The timer displays a default time of 10 minutes
and the “0” will begin to flash.
3.
While the ‘0’ is flashing, use the power slider
to set the units figure (between 0 and 9). Then
touch the timer control key again; the ‘1’ (tens
figure) starts to flash. While the tens figure is
flashing, use the power slider to set the tens
figure (between 0 and 9).
4. About 5 seconds after the last touch of the slider, the timer display
stops flashing, and the cooking duration time is accepted and starts to
count down on the display.
A white dot will flash next to the relevant power level indicator to show
which zone is currently being controlled by the timer.
5. When the cooking duration time has elapsed, the relevant cooking
zone will be switched off automatically.
