10
4. While the zone selection indicator is flashing, use the slider to
select the required power level.
•
If a power level is not selected within 1 minute, the induction hob
will automatically switch off.
•
When needing to modify the power level, touch the relevant
heating selection zone key again until the power level indicator is
flashing. While the power level indicator is flashing, use the slider
to adjust the power level.
If the display flashes
alternately with the heat setting
This means that:
•
You have not placed a pan on the correct cooking zone or;
•
The pan you’re using is not suitable for induction cooking or;
•
The pan is too small or not properly centered on the cooking zone. Always use an induction pan with
a base diameter of at least 145mm.
No heating takes place unless there is a suitable pan on the cooking zone. The display will
automatically turn off after 1 minute if no suitable pan is placed on it.
Finish cooking
Touch the relevant heating zone selection control for the zone that you
wish to turn off. An indicator will flash next to the control to indicate which
zone is currently selected.
Turn the cooking zone off by touching
until the display shows 0.
Turn the whole hob off by touching the On/Off control key.
