Using The Programmer / Clock
What your timer symbols
mean
i
This is a 24 hour clock.
Before you use your
appliance for the first
time, you
must
ensure
that the time of day is
set.
i
End
time
Cook
time
Minute
minder
Set time of day
(initial set up)
10
11
12
13
Cook time
End time
Minute minder
Set time of day
Symbol Quick Guide
For best results when
using the programmers
touch controls - touch
and then remove your
fingertip quickly and
lightly - unless the
instruction states other-
wise.
TIP: Make sure fingertips
are cool and dry.
i
Your touch control electronic clock / programmer has the
following functions, in addition to being a clock.
Further details are given in this section of the handbook.
Please note: The automatic programmer is only
available for the main oven. The top oven can
only be used in manual mode.
Minute minder:
Creates an alarm signal when the period of time finish-
es; the oven does not need to be in use in order to use
this function.
Cooking Time:
To cook for a selected length of time; the oven turns off
automatically when the time finishes.
End Cooking Time:
To cook until a set time; the oven turns off automatically
when the time is reached.
Automatic Programmer (Cook time + End Time):
To cook for a selected length of time and end at a set
time. When this function is set, the oven comes on auto-
matically at the time required in order to cook for the
set length of time (Cook time) and end automatically at
the indicated time (End Time).
Oven Lighting:
The lights inside the oven are designed to illuminate the
cavity interior when a cooking function is selected. Once
the oven function is set the lights will extinguish after a
set period of time.
If you wish to turn the oven lights back on during cook-
ing simply press the ’Oven On’
icon.
Note:
If you finger remains on this icon for a short peri-
od of time the light will remain on throughout the cook-
ing process.
8
