
Installation
If this appliance is to be installed near to a corner where
the adjacent cabinets run at right angles forward of the
appliance, there must be a gap of at least 90mm
between the appliance and the cabinets, to prevent over-
heating of the cabinets (see FIG 2)
Please note that all dimensions and sizes given are nomi-
nal, some variation is to be expected.
Whilst every care is taken to eliminate burrs and raw
edges from this product, please take care when handling
- we recommend the use of protective gloves during
installation.
Leave the appliance in the base tray packaging until you
are ready to install it. When you remove the appliance
from the base tray packaging, take care not to damage
it.
Important:
Do not modify the outer panels of this appli-
ance in any way.
Fixing screws
The fixing screws are in a polythene bag in the oven pack.
Depending on the method of installation, some of the
screws may not be needed.
If you have a non standard size of cabinet which leaves a
gap above or below the appliance, you may be able to
buy a trim kit (to fill in the gap) from the supplier of your
cabinets.
33