Using The Programmer / Clock
10
11
12
13
Cook time
End time
Minute minder
Set time of day
Symbol ‘Quick Guide
Always keep the fascia
panel clear of any cook-
ing fats/greases as this
may impair the touch
control panel.
The fascia panel may also
require regular wiping
with a soft cloth to pre-
vent a build up of oils
from your fingertips.
i
Setting the Automatic Programmer
1. Repeatedly touch the clock screen until symbol
11
lights
up.
2. Select the period of time you wish to cook for by
touching, and holding “+” or “–”. This is adjusted in
increments of one minute.
3. The clock beeps twice, the current time is displayed
and symbol
11
lights up permanently.
4. Repeatedly touch the clock screen again until symbol
10
lights up.
5. The current time of day appears on the clock screen,
this is adjusted by touching and holding the “+” symbol
until you have the hour, and minutes past that you
require. Using the “–” symbol will also adjust the time
if you go past the time you want.
6. The clock beeps twice, the current time is displayed
and symbol
10
lights up permanently.
7. Select a cooking function and temperature - to set the
oven function and temperature please refer to the
‘Using Your Oven’
section. The clock will beep and
the oven lights will come on for a short time.
8. The oven remains off with symbols
11
and
10
lit up.
Your oven is programmed. The oven light remains off.
9. When the time to start cooking is reached, the oven
starts up and cooks for the set period of time.
10. When the set time is reached, the oven turns itself
off, the alarm sounds and symbols
11
and
10
flash.
11. Touch any main oven icon to silence the alarm. Make
sure that the appliance is switched off after using the
Automatic Programmer.
Should you need extra time, switch the oven back on,
and re-set the programmer if required.
To cancel
the Automatic Programmer, touch the ‘Oven
Off’ symbol, and either re-program or switch the oven
back on. Alternativley, touch the clock screen until
symbol
11
flashes, then use the “–” symbol to reduce to
zero cancelling the timer function.
If you wish to modify the end cooking time when cook-
ing is already in progress, touch the clock screen until
10
flashes.
You can then modify the end cooking time by touching
“+” or “–”. The clock beeps twice to confirm the
change.
12
