STOVES 900G User, Installation & Servicing Instructions Download

Page: 40 / 48

12. Oven burner / electrode /

injector

a. From inside the oven remove the oven

burner shield by slackening the single
screw through the hole in the front of
the oven burner shield, slide forward
and lift off.

b. Pull off the lead from the electrode at

the LH end of the burner.

Remove FSD probe from its securing
clip.

d. Unscrew the knurled nut from its

securing clip.

e. Ease forward off the locating screw,

then slide to left to clear the injector.

13. Grill electrode

a. Open grill door.
b. The electrode is secured by one screw

to the grill burner.

Disconnect the electrode lead.

14. Grill door glass panel

a. Open the door and insert 2 screws

through the inner holes in the door
hinge arms (to stop the door frame
springing back when you remove the
glass panel).

b. Unscrew the 2 corner screws through

the door frame.

Remove the glass panel by carefully
pulling towards you.

15. Grill / oven solenoid valve

a. Release appliance from housing unit (1).
b. Unscrew the top / rear panel

backwards, remove both fan leads
and lift panel clear.

Release inlet and outlet pipes,
disconnect the 3 wires and remove.

16. Grill injector

a. Remove appliance from housing (1).
b. Unscrew the top / rear panel securing

screws. Ease the panel backwards,
remove both fan leads & lift panel clear.

Remove grill burner cover.

d. Remove fixing screw from grill burner

aeration cap.

e. Lift grill burner and slide aeration cap

off.

Access the injector inside the aeration
cap.

17. Grill burner

a. Remove appliance from housing (1).
b. Unscrew the top / rear panel securing

screws. Ease the panel backwards,
remove both fan leads & lift panel clear.

Remove grill burner cover.

d. Remove fixing screw from grill burner

aeration cap.

e. Lift grill burner and slide aeration cap

off.

Remove h.t. lead from grill electrode.

g. Remove the 3 fixing screws securing

the grill burner clamping plate to the
inside of the grill cavity roof.

h. The grill burner front will drop down

away from the roof of the cavity and
the remainder of the burner can be
eased out.

SERVICING INSTRUCTIONS

23894 02 - Q901G/900G RS2 03/04/2001 14:19 Page 40

Summary of Contents for 900G

















































Search results

Summary of Contents for 900G

Reviews:

Related manuals for 900G

Brands by name

Popular brands

STOVES 900G, User, Installation & Servicing Instructions

Search results

Summary of Contents for 900G

Reviews:

Related manuals for 900G

Brands by name

Popular brands