STOVES 900G User, Installation & Servicing Instructions Download

Page: 38 / 48

Before servicing:

Disconnect the gas

and electrical supplies.

After servicing:

Check gas soundness.

1. Remove appliance from housing

a. Disconnect the electricity supply.
b. Open the grill door and unscrew the 2

screws through the front frame.

Pull forward & out onto a suitable
surface.

d. Disconnect the gas supply inlet from

the rear wall.

2. Fascia panel

d. Pull off control knobs & programmer

buttons.

Q901G -

From the rear, remove the

4 screws (2 each end) securing the
fascia to the front frame.
The fascia can now be pulled clear,
complete with programmer.

900G -

Open the grill door & support

the facia glass while unscrewing its
securing screws from under the facia.
Hold down the bottom edge of the
glass, pull forward slightly & then down,
to release it from its locating clips.

3. Cooling fan

a. Remove appliance from housing (1).
b. Unscrew the top / back panel

securing screws.

Ease the panel backwards to gain
access to the fan. Disconnect the 2
wires from the fan.

d. Support the fan and remove the four

fixing screws which secure the fan to
the panel.

4. Ignition generator

a. Remove appliance from housing (1).
b. Unscrew the top / rear panel securing

screws. Ease the panel backwards,

remove both fan leads & lift panel clear.

Unscrew the 2 screws which secure
the generator to the inner rear panel.

d. Disconnect the leads.
e. Re-connect leads to new generator.

5. Oven / grill switches

a. Remove appliance from housing (1).
b. Unscrew the top / rear panel securing

screw. Ease panel backwards, remove
both fan leads & lift panel clear.

Remove the fascia glass panel (2).

d. Disconnect the outlet tubing

connection from the thermostat and
the grill tap.

e. Remove the two screws securing the

gas rail support bracket to the front
frame.

Remove the 2 screws securing the gas
rail inlet pipe to the rear panel and lift
the gas rail assembly away from the
appliance.

g. Remove circlip from grill tap spindle to

allow removal of switch.

h. Slide switch off the thermostat spindle.

6. Door frame(s)

a. The oven inner glass panel is not

secured to the frame and can be
removed. Hold the top and bottom
edges of the glass and slide out.

b. Insert 2 screws through the inner holes

in the door hinge arms (to stop the
door from springing up).

With the aid of a small screwdriver,
prise out both inner door glass stops,
near the bottom of each side
extrusion.

d. Slide door forwards off the plastic

hinge blocks.

SERVICING INSTRUCTIONS

23894 02 - Q901G/900G RS2 03/04/2001 14:19 Page 38

Summary of Contents for 900G

















































Search results

Summary of Contents for 900G

Reviews:

Related manuals for 900G

Brands by name

Popular brands

STOVES 900G, User, Installation & Servicing Instructions

Search results

Summary of Contents for 900G

Reviews:

Related manuals for 900G

Brands by name

Popular brands