STOVES 60 LC, Users Manual & Installation Handbook

Page: 29 / 52

USING THE PROGRAMMER - TOUCH
Once the COOKING TIME has expired, the
ACOUSTIC SIGNAL is heard. The display
shows
& the symbol
flashes.
After seven minutes maximum or after
touching any of the touch control symbols,
the ACOUSTIC SIGNAL stops but the
symbol continues to flash.Touch the
FUNCTION symbol, the symbol is
displayed continously & the current TIME
of DAY is displayed, except if the MINUTE
MINDER is active.
3.7 End of Cooking Time
The END of COOKING TIME function
MUST be used in conjunction with
the COOKING TIME function. This is in
order to allow the user to set the START
TIME for the cooking to begin - see the
following section on DELAYED COOKING.
To select the END of COOKING TIME
mode keep touching the FUNCTION
symbol until the END of COOKING TIME
symbol is flashing. The END of
COOKING TIME can be set using the + or
- symbols. The display shows the current
TIME of DAY plus the set COOKING TIME.
The latest END of COOKING TIME is
limited to the current TIME of DAY plus
.
Five seconds after setting, the MANUAL
mode changes to AUTOMATIC mode & the
display shows the COOKING POT symbol
& the current TIME of DAY.
To modify or delete the END of COOKING
TIME, select the function until the END of
COOKING TIME symbol is flashing.
The END of COOKING TIME can be
modified by using the + or - symbols.
The END of COOKING TIME can be
deleted by counting back using the -
symbol until it equals the current TIME of
DAY.
The END of COOKING TIME has expired
- see COOKING TIME has expired
paragraph 3.6.