STOVES 60 LC Users Manual & Installation Handbook Download

Page: 43 / 52

13.010

INSTALLATION

STEP 4: SECURE APPLIANCE INTO

HOUSING UNIT

Note : The unit housing the appliance

must be appropriately fixed. Ensure that

the appliance is centrally located. Take

care not to damage the appliance or

cabinetry.

70cm only

Method 1 : Care must be taken to ensure

the appliance runners are sufficiently

engaged over the top of the runners on

the base units.

Method 2 : Insert appliance into the cabi

net - ensure that it is engaged over the

top of the side runners.

Method 3 : Insert appliance into cabinet
Note: For installation Method 1, you will

need to drill through the fixing holes into

the side trims with a 3.2mm diameter drill.
There are 4/6 black no 8 x 25mm long

chipboard screws for securing appliance

to cabinet. Insert appliance into cabinet

and secure.

60cm ovens

- Open the oven door and screw the 4

fixing screws through the holes in the

front frame.

70/90cm ovens

- Open the grill / top oven door, and screw

2 fixing screws through the top corner

holes in the front frame.
- With the grill / top oven door still open,

screw 2 fixing screws through the holes

located under the grill compartment.

Close the grill / top oven door.
- Open the main oven door and screw 2

fixing screws through the bottom corner

holes in the front frame.

60/70/90 fixing positions

Summary of Contents for 60 LC





















































Search results

Summary of Contents for 60 LC

Reviews:

Related manuals for 60 LC

Brands by name

Popular brands

STOVES 60 LC, Users Manual & Installation Handbook

Search results

Summary of Contents for 60 LC

Reviews:

Related manuals for 60 LC

Brands by name

Popular brands