STOVES 60 LC Users Manual & Installation Handbook Download

Page: 44 / 52

13.010

INSTALLATION

Anti-stain trim (if fitted)

The anti-stain trim is factory fitted to

the edges of the appliance front frame.
This trim provides the cabinetry with

extra protection from any escape of heat.

- When Installing the product, ensure

the anti-stain trim is correctly located

on the edges of the front frame, before

positioning and securing the appliance to

the cabinet.

- When securing the appliance, the fixing

screws provided are driven through the

anti-stain trim into the cabinet.

Note : When supplied the anti-stain trim

may be loose and is only supported by

plastic rivets. The anti-stain trim will be

secured when the fixing screws are fully

home into the cabinet. The plastic rivets

should not be removed.

Edging strip (if fitted)

The edging strip is factory fitted to

the edges of the appliance front frame.

This strip provides the cabinetry with ex-

tra protection from any escape of heat.
When installing the product, ensure
that the edging strip is correctly located
on the outer edges of the front frame,
before positioning and securing the
appliance to the cabinet.

When securing the appliance, the fixing

screws provided are driven through the

edging strips into the cabinet - the seal

will straighten up and sit flush to the

cabinet when the screws are fully home.

Summary of Contents for 60 LC





















































Search results

Summary of Contents for 60 LC

Reviews:

Related manuals for 60 LC

Brands by name

Popular brands

STOVES 60 LC, Users Manual & Installation Handbook

Search results

Summary of Contents for 60 LC

Reviews:

Related manuals for 60 LC

Brands by name

Popular brands