background image

11 

10 

2. SAFET Y RECOMMENDATIONS 

The manufacturer is not re-
sponsible for any damage 
or personal injury caused 

by inappropriate, incorrect or irre-
sponsible use. 

3. INTENDED USE 

The 

MIGHTY

 Vaporizer releases fra-

grances or aromas from the herbs 
and other plant materials listed below. 
These aromatic substances are re-
leased through vaporization by heat-
ed air, and may be directly inhaled. 
The device may only be used with the 
recommended vaporizing media. The 
use of other substances can present 
a health risk. 
The 

MIGHTY

 Vaporizer is not intend-

ed for medical/therapeutic purposes. 

4. OVERVIEW OF PLANTS 

  

Portion of the Temperature- 

 

Plant name  Botanical name 

plant used setting 

Eucalyptus  

Eucalyptus globulus 

the leaves  

130°C (266°F)  

Hops 

Humulus lupulus 

the cones 

154°C (309°F) 

Chamomile 

Matriarca chamomilla 

the blossoms 

190°C (374°F) 

Lavender 

Lavandula angustifolia  the blossoms  

130°C (266°F) 

Lemon balm  

Melissa officinalis  

the leaves  

142°C (288°F) 

Sage  

Salvia officinalis  

the leaves  

190°C (374°F) 

Thyme  

Thymus vulgaris  

the herb  

190°C (374°F) 

Below is an overview of the plants that 
are suitable for vaporization in the 

MIGHTY

 Vaporizer. 

The aromas and fragrances from the 
plant materials listed below may be 
vaporized.*

Any other use is inappropriate and po-
tentially dangerous. 

It is important to observe the following 
instructions in order to set the 

MIGHTY

  

Vaporizer with the plant material in the 
best possible way for your personal re-
quirements. 
*This statement has not been evalu-
ated by the FDA. The 

MIGHTY

 Vapor-

izer is not a medical device and is not 
intended to diagnose, treat, cure or 
prevent any disease.  

WARNING: 

Please consult your doctor or 
pharmacist if you have any 

medical concerns. It is possible that 
some plants may cause allergic reac-
tions for the user. If this occurs, it is 
urgently recommended to refrain from 
further use of such plants.  
Only use the plant parts which are 
found in this list and which have been 
verified according to the regulations 
of the European or any other pharma-
copoeia with regard to genuineness, 
purity and pathogenic germs. You can 
purchase such plants or plant parts in 
pharmacies.*

Summary of Contents for Mighty




















Reviews: