background image

35 

34 

14. WARRANT Y, LIABILIT Y, REPAIR SERVICE

All requests and notices from U.S. 
and Canadian customers under this 
warranty shall be directed to:

Storz & Bickel America, Inc.  

1078 60th Street, Suite A 
Oakland, CA 94608, USA 

All requests and notices from all 
other Customers under this warranty 
shall be directed to:

Storz & Bickel GmbH & Co. KG  

In Grubenäcker 5-9 
78532 Tuttlingen, Germany 

The warranty set forth in section 

“Warranty and limitations”

 is made 

in lieu of all other warranties (whether 
express or implied), rights or condi-
tions, and Customer acknowledges 
that except for such limited warranty, 
the Products are provided “as is”. 
Company specifically disclaims, with-
out limitation, all other warranties, 
express or implied, of any kind, in-
cluding, without limitation, the implied 
warranties of merchantability and 
fitness for a particular purpose, non-
infringement, and those warranties 
arising from a course of performance, 
a course of dealing or trade usage. 

Liability 

Handling of these Products is to be as 
stated in the Instructions for Use. The 
user accepts full liability for improper 
handling and usage of these Products. 
The intended application only refers to 
the plants named by us.
Repair of these Products is only to be 
done by us or one of our authorized 
customer services. 
Only original Storz & Bickel parts are to 
be used.
Failure to comply with any of the points 
mentioned in these Instructions for Use 
release Storz & Bickel GmbH & Co. KG 
from any and all liability.

Limitation of Liability 

In no event shall Company be liable 
for any indirect, incidental, punitive, 
special or consequential damages, 
including but not limited to, damages 
for loss of profits, revenue, goodwill or 
use, incurred by Customer or any third 
party, whether in an action in contract, 
tort, strict liability, or imposed by stat-
ute, or otherwise, even if advised of 
the possibility of such damages. 
Company’s liability for damages aris-
ing out of or in connection with this 
agreement shall in no event exceed 
the purchase price of the Products. It 
is agreed and acknowledged that the 
provisions of this agreement allocate 

Repair Service

After the warranty period has expired, 
or if there are any defects which are 
not covered under warranty, our ser-
vice department will repair the defect 
after providing the Customer with an 
estimate and receiving the payment.

Copyright

 

No part of this document may be re-
produced in any form (by printing, 
photocopying or other means) or 
processed, duplicated or circulated 
electronically without the prior writ-
ten approval of Storz & Bickel GmbH 
& Co. KG.

the risks between Company and Cus-
tomer, that Company’s pricing reflects 
this allocation of risk, and but for this 
allocation and limitation of liability, 
Company would not have entered into 
this agreement.
In jurisdictions that limit the scope of 
or preclude limitations or exclusion of 
remedies or damages, or of liability, 
such as liability for gross negligence 
or willful misconduct or do not allow 
implied warranties to be excluded, the 
limitation or exclusion of warranties, 
remedies, damages or liability set 
forth above are intended to apply to 
the maximum extent permitted by ap-
plicable law. Customer may also have 
other rights that vary by state, country 
or other jurisdiction.
The information contained in these 
Instructions for Use are based on our 
experience and is current and com-
plete to the best of our knowledge and 
ability at the time of printing. Storz & 
Bickel GmbH & Co. KG does not ac-
cept responsibility for errors, omis-
sions or incorrect interpretations of 
the contents or any information herein. 
Users are advised that all applications 
and uses of the Products described 
must conform to applicable local laws, 
ordinances and codes and users of 
the Products are advised that they are 
solely responsible for determining and 
assuring the suitability of any Product 
for the intended application. 

14. WARRANT Y, LIABILIT Y, REPAIR SERVICE

Summary of Contents for Mighty




















Reviews: