19
18
7. C O M M I S S I O N I N G A N D O P E R AT I O N
Fahrenheit/Celsius
If you simultaneously tap on the plus
button and the minus button, the dis-
play changes from degree Celsius to
degree Fahrenheit and vice versa.
7.4. Reset to Default Settings
It is possible to reset settings. The
reset is made by pressing the ON/
OFF button for ten seconds while the
MIGHTY
Vaporizer is switched on. If
the ON/OFF button has been pressed
for ten seconds, the signaling of the
reset is made by vibration. The basic
temperature is reset to 180°C (356°F)
and the booster temperature is reset
to 195°C (383°F).
7.5. Default Settings
Basic temperature:
180°C (356°F)
Booster temperature:
additional 15°C (27°F),
so corresponding to 195°C (383°F)
8. FILLING THE FILLING CHAMBER
Turn the Cooling Unit with a 90° rota-
tion counterclockwise in order to re-
move it from the Vaporizer.
Always fill the Filling Chamber com-
pletely up to the plastic rim with
ground plant material. Do not com-
Removal of Cooling Unit (with Mouthpiece)
Filling Chamber properly filled
Filling Chamber partially filled, with Liquid
Pad placed on top
press the plant material too much so
that the airflow is not unnecessarily
impeded. Remove any excess plant
material left around the filling aperture
so that it is clean and allows the Cool-
ing Unit to be fitted.
If the Filling Chamber is only
partially filled, then the vapori-
zation material may shift
around; the hot air then bypasses the
vaporization material, so that no va-
porization can occur.
If the Filling Chamber is not to be
filled completely, it is recomended to
place the included Liquid Pad over the
herbs, and then mount the Cooling
Unit on the Vaporizer.
