6
Instructions for composition
Step 1:
Turn the Seat post (#3) and Saddle
(#32) bottom side up as shown. Slide
the saddle onto the seat post. Use 2pcs
M6*10 bolts (#67) to attach the 1pcs
stop (#35) to the seat post (#3). Then
attach the rear stabilizer (#4) to the seat
post (#3) using 4pcs M8*15 bolts (#69)
and 4pcs pads (#71).
Step 2:
Attach the front stabilizer (#2) to the
main frame (#1) using 4pcs M8*15 bolts
(#69) and 4pcs pads (#71).
Note: The fan part is inserted into a
polystyrene protector. Remove this
after the machine is assembled.
Step 3:
Insert 4 M12 axles (#30) through the
pedals into the holes in the main frame
(#1) and attach.
Note: Make sure you attach the right
pedal to the right side and the left pedal
to the left side.