StormRed EAGLE, User Manual, Page: 18 / 75

18
Body fat
1. In STOP mode, press the BODY FAT button to start the body fat measurement (Figure
21).
2. Users must hold both hands on the handles during the measurement. And the LCD
will display "= " "= = " (Figure 22) for 8 seconds until the computer completes the
measurement.
3. The LCD will display the BODY FAT recommendation symbol, BODY FAT percentage
(Figure 23), BMI (Figure 24) for 30 seconds.
4. Error message:
*The LCD display will show "= = " " " = =" (Figure 25) - this means you are not holding the
handle or wearing the chest belt correctly.
*E-1 - No heart rate signal input was detected.
*E-4 - Occurs when the FAT % is below 5 or above 50 and the BMI score is below 5 or
above 50 (Figure 26).
Drawing 21 Drawing 22
Drawing 23 Drawing 24
Drawing 25 Drawing 26
Notes:
•
After four minutes without pedalling or pulse input, the console switches to
power saving mode. Press any key to wake up the console.
•
If the computer behaves abnormally, unplug the adapter, and plug it back in.