Power Up
IP Address
Login
Navigation
Online Help
Web Installer Interface
Access & Help
2
9
Master Volume of the selected Theater
can be adjusted here. MUTE is available
as well as a DIM function that turns
the Volume down by an amount defined
in the Settings page (see part 7).
Configuration of the ISP is made in few
tabs split in the following categories:
- System parameters (1)
- Inputs definition (2)
- Speakers allocation and Room
Calibration for Mains and Alternate
outputs (3)
- General settings (4)
- Listening Presets (5)
- Monitoring to visualize installation status (6)
Once configured you can control
the ISP via the Remote Page (7)
1 2
3
4 5 6
In some cases, it might be
required to restart the ISP
by pressing the RESTART button.
Note that this will not erase the
stored settings.
Pressing LOG OUT will take you
back to HOME page with only
possible access to REMOTE control.
2.6)
Select Expert Setup again. You will access the System Page of the ISP.
2.7)
The Web Installer Interface is structured around a common part on the top area
that will remain accessible at all time and give access to the basic functions.
This area provides the means to
change some of the settings at anytime
without having to access the Remote
Control page. Can be changed: Source, Preset,
Theater (and related Profiles) and Surround mode.
To help you understand all the functions and
settings of the product, an Online
Contextual Help is accessible. By turning it to ON,
question marks will pop up next to each
function. Simply click on it for the function you
need help on.
7
