Room Calibration
Dirac Live®
6
Introduction
Setup
Measure
Optimize
Export
30
6.
A pop-up describing the process will be shown. Verify that you are in the
correct Theater and Audio Profile. If not, cancel and make proper selection
as described in 6.3) step 1. Also make sure you now have your microphone
connected to the laptop.
7.
Press Start New calibration to set the ISP in Calibration mode.
At this time, all audio adjustments made on the remote will be deactivated
to not alter the calibration.
6
7
6.4) Launch the Dirac Live
®
Calibration Tool (DLCT 2.0).
The application will go into the first tab / step of the DLCT.
1
4
1.
A first page will show the accessible devices.
2.
Log in using the credentials you have created
when registering to the Dirac Live website.
3.
In this step, you must select the device you
want to calibrate.
4.
If the expected device is not listed, you can
restart a scanning process.
5.
At any step of the process, you can find some
HELP by selecting the question mark.
3
5
2
