Web Installer Interface
Speakers setup
5
Principles
Creation
Theater
Layout
Bass
Speakers Adjustments
Distance
Manual
Management
Noise
Generator Levels Equalization
Sub
Theater
Audio
Zones
23
5.8)
Groups being defined, you can now adjust the levels as described below.
1
2
3
1. Select the signal you want to generate between Sine, Pink Noise and Narrow Band Pink Noise.
In case of Sine selection, a frequency parameter that you can adjust will be shown.
2. Activate the Noise Generator.
Group playing is highlighted in Green.
3.
Adjust the level of the Group playing.
4.
Change from Group to adjust using Group + and Group -
Once you have completed the levels adjustments, turn the Generator to OFF.
5.
It is possible to visualize the response of a speaker group by activating the RTA function. See next part 5.9
for a detailed description.
!
4
!
Before activating the Generator, make sure the
Master Volume is at a reasonable level to start,
such as -30 dB. Default gain is set to 0.10 (-20 dBfs)
!
5
i
To always work at the same sound level such as 85dBc, it is possible to set a Volume Level corresponding
to this sound pressure. You can set and recall this Reference Volume Level here.
i
