Web Installer Interface
Settings
7
Triggers
Parameters
Front Panel
AV Delay
HDMI
16ch AES
IR Control
40
In this Step, you will adjust the Settings of the ISP by selecting the Settings tab.
1.
To allow manual change of a Trigger on the Remote, turn Manual Switching to ON
2.
To automatize the Trigger behaviour, there are three possible modes:
- on Wake = Trigger takes its active status at unit Wake Up,
- on Input = Trigger takes its active status when an Input is selected,
- on Presets = Trigger takes its active status when a Preset is selected.
3.
When Unit goes to Sleep mode, you can define how the Trigger should react.
4.
The Active Status can be defined as 0V or 12V.
5. Finally, it is possible to define a delay between the action occurence and the Trigger change
between 0 to 8s.
1
2
2
3
4
Adjustment of Triggers are made as below:
5
