Figure 2–1 HSD05 Array Controller Module Board Layout
DS1
DS2
DS3
DS4
SW2
W9
W8
W3
CXO-4053A-PH
The functions of the switches and jumpers on the module board are given in the
following tables:
•
Table 2–2
lists the jumper settings for the HSD05 array controller. These
settings need not be changed during a normal installation.
•
Table 2–3
lists the switch sections in the device configuration switchpack
(SW2). You will need to set these switches according to the procedures given
in Section 2.4.
Preparing to Use the HSD05 Array Controller 2–3
