S800A GNSS Receiver – User Manual
20
3.3
RTK Dynamic Measurement (Network)
3.3.1 Installations of Base and Rover
Because RTK network mode is transmitting differential data by network,
differing from radio mode only on their transmission method, the
installations of base and rover are similar. And owing to S800A doesn’t have
internal network functionality, it’s normally not used as a network base.
3.3.2 Configuration of Rover
Open Cube-a on the handheld to choose communication mode. Click
“Device” - “Working mode” to choose rover mode and configure its data link,
antenna parameters and satellite system. When data link is handheld
network, you can configure IP, COM port and AP and other settings. It can
also operate as a RTK by getting access to server through handheld network,
using the handheld network module to get into internet. After connection to
the server, the received differential data can be transmitted to receiver so as
to realize that receiver can be a network RTK without SIM card.
