S800A GNSS Receiver – User Manual
9
2.1.4 Mode View and Mode Switch
a)
Mode view
When receiver is powered on, flip the power button and then it will voice
broadcast the current working mode and data link.
b)
Mode switch
When the receiver is powered on, connect it with handheld or other
instruments so as to set up and switch the working mode of receiver. See
detailed operation procedures in Cube-a User Manual.
2.1.5 Receiver Self-check
Self-check functionality is to check whether every module works normally.
When S800A receiver has indicators off or module doesn’t work normally,
you can use self-check to inspect the receiver. S800A self-check consists of
four parts, namely GPS, radio, WIFI and Bluetooth. The self-check results will
be voice broadcasted in the process. Self-check operation and result
broadcast are as followed:
a)
When receiver is powered on, press power button and hold it until
the receiver voice broadcasts “power off”. Press it again until the receiver
sounds a beep and voice broadcasts “self-check”, which means the receiver
starts to operate self-check. (New receiver is recommended to operate self-
check at least once.)
b)
In the process of self-check, each module inspection is followed by
its inspection result. If the module inspection passes, it will voice broadcast
“OK” and module led keeps on until the whole self-check finishes. If the
