S800A GNSS Receiver – User Manual
19
3.2.4 Configuration of Rover
Open Cube-a software on the handheld to choose communication mode.
Click “Device” - “Working mode” to choose rover mode and configure its
data link, antenna parameters and satellite system and other settings. When
data link is internal radio, you need to configure the radio channel,
frequency, protocol and power.
Note:
1.
If you want an high-precision surveying result (several cm), it’s
recommended to use a tripod to install rover;
2.
When the coverage of surveying area is large (over 4 km from base),
the working distance too far for internal radio to meet the demand, it’s
recommended to use external radio to connect the receiver;
3.
Under radio mode, frequency and protocol settings of base and
rover should be the same.
