43
Chapter V: Stonex Assistant for S9III
DefRadSettings
Setting the Dynamic working mode (Rover or Base) the following parameters should be
specified:
a)
Differential type: To select the format of the differential correction.
b)
Elevation mask: to enable reception of signal only above the inserted horizontal angle.
c)
Record Raw data: to record raw data inside memory of S9III.
d)
Using Glonass: To enable/Disable Glonass reception.
Select “Static” for a Static Survey operation , “Dynamic” if you want to do RTK measures with
your S9III.
V.3.1. Static Data Survey
Static mode data entry page is reported on Fig 5.5:
