DR365V-HA Setup Guide
Software Configuration
V8.0.3x
© StoneFly Inc. | All rights reserved
Page 57
Right click on
SCVM,
and select
Connect
to access the user interface of the Virtual Machine.
This will show a window like this:
Steps to use the pre-installed SCVM:
1. The SCVM management network interface is preconfigured with the default IP address of
192.168.0.254. This must be changed to a valid address for your LAN network. Login to the “SC
Service” console using the Hyper-V “Virtual Console” for the SCVM by doing the following:
a.
Press
Enter
to display the login prompt.
