DR365V-HA Setup Guide
Software Configuration
V8.0.3x
© StoneFly Inc. | All rights reserved
Page 48
4.4
Steps to Configure SCVM Management Port (VMware)
You will need to configure a computer located on the same subnet as the StoneFly DR365V-HA
appliance to allow it to remotely manage the StoneFly DR365V-HA. Open a web browser on the
remote system and in the address bar type in the IP address set in previous section
“http://DR365V_IP_ADDRESS” and press the
Enter
key. You will see a screen like the one
shown below:
Click on the
Download vSphere Client
link. This will guide you to download and install the
vSphere Client which will allow you to access your StoneFly DR365V-HA via its VMware ESXi
hypervisor.
After the VMware vSphere Client is installed, it will create an icon on your desktop. Double-
click on the “vSphere Client icon” to launch the Client. Use the same credentials to log in to the
system:
IP address / Name: <
IP address you configured for the DR365V-HA
>
Username
: root
Password
: stonefly
