866-795-1586 • WWW.STONEAGETOOLS.COM
17
BA 006
Shaft Seal
BAE 008
O-Ring
BRLM 109
Bearing
BAE 001-P
x
Shaft
4” BADGER DISASSEMBLY
Figure 4: For Step 7
Figure 5: For Step 8
7. Use an arbor press to press the Bearing off
of the Shaft. Be sure the bearing is set flat on
the press before applying pressure. Pressing
the shaft out of the bearing at an angle could
cause damage to the bearing.
9. Remove both Port Plugs from the Head.
10. Use a flat head screwdriver to remove the
Shaft Seal and inspect for damage.
Figure 6: For Steps 9-10
8. Use a small pick to remove the O-Ring and
the Shaft Seal and inspect both for damage.
BA 007
Shaft Seal
BAE 002
Nut
BJ 026
Port Plug
BAE 040-R
xx
Head
INSPECT
INSPECT
NOTICE
Before reassembly of the tool
Wash all parts in solvent and blow dry
and
Inspect wear items, (High Pressure Seal
Assembly, O-Rings, and Port Screw.)
See the
“Maintenance Kits”
section of this
manual for a complete list of Service, Overhaul,
and, Tool kits.
