12
866-795-1586 • WWW.STONEAGETOOLS.COM
ABX-2L AND ABX-2L-V2 MANIFOLD UPGRADE
SPLICING THE TUBING FOR THE T-FITTINGS
1. Disconnect the red and black air tubes from the fittings on the left side of the flow controls.
(FIGURE 1)
Cut exactly 2 inches off the end of
the red tube and 3 inches off the black tube.
(FIGURE 2)
2. Connect the red and black tubes with the T-fittings from the manifold to the fittings on the left side of the flow controls. Connect the
other end of the T-fittings to the end of the cut tubing. The tubes from the manifold assembly should lie between the flow control knobs.
(FIGURE 3)
3. Attach the Top Plate and close the Side Door Assembly.
(FIGURE4)
4. Install the two Quick Disconnect Fittings to the brass elbows using pipe dope or tape on the tapered threads.
(FIGURE 5)
FIGURE 1
FIGURE 2
FIGURE 4
FIGURE 3
FIGURE 5
COMPLETED
OR
Remove 3”
Remove 2”
CONNECT T-FITTINGS