TROUBLESHOOTING GUIDE
11
EN
TROUBLESHOOTING GUIDE
Stollar 800JE Commercial Juicer
POSSIBLE PROBLEM
EASY SOLUTION
Machine will not work when
switched ‘ON’
The safety locking arm may not be correctly engaged in the
vertical operating position with the locking arm located into the
two grooves on either side of the juicer cover.
Motor appears to stall when
juicing
Wet pulp can build up under the cover if the juicing action is too
vigorous. Try slower juicing action by pushing the food pusher
down more slowly. Clean the filter bowl surround, the stainless
steel filter and the juicer cover.
Excess pulp building up in the
micro mesh filter basket
Stop the juicing process. Remove the juicer cover, scrape off pulp.
Re-assemble and begin juicing again. Try alternating (soft and
hard) vegetable and fruit varieties.
Pulp too wet and reduced
extracted juice
Try a slower juicing action. Remove stainless steel mesh filter
basket and thoroughly clean mesh walls with a fine brush.
Rinse the filter basket under hot water. If the fine mesh holes
are blocked, soak the basket in a solution of hot water with 10%
lemon juice to unblock the holes or wash in the dishwasher. This
will remove excess fibre build up (from fruit or vegetables) which
could be inhibiting the juice flow.
Juice leaks between the rim of
the Juicer and cover the filter
Try a slower juicing action by pushing the food pusher down
more slowly.
Bowl surround juice sprays
out from spout
Try a slower juicing action by pushing the food pusher down
more slowly.
