Due to continuous product research and development,
the information contained herein is subject to change without notice.
Page 5
www.stoddart.com.au
Specification
Setting Up
Handling
Unpacking
Positioning
Disposal
Plumbing Connections
• The drainage must be drained to a tundish
• The unit MUST be on a level surface for the water to drain properly
Information
IMPORTANT
This unit must be installed in accordance with AS/NZ 3500.1
Improper installation, adjustments, alterations, service or maintenance can cause property damage, injury or death�
• Use suitable means to move the unit: eg� A lift truck or fork pallet trucks (the forks should reach more completely beneath the unit)
• Check the unit for damage before and after unpacking� If unit is damaged, contact the distributor and manufacturer
• Should any item have physical damage, report the details to the freight company and to the agent responsible for the dispatch within
seven (7) days of receipt� No claims will be accepted or processed after this period
• The unit is supplied fully assembled
• Remove all protective plastic film, tapes, ties and packers before installing and operating
• Clean off any remaining residue from the interior/exterior of the unit using a clean cloth dampened with warm soapy water
• Choose an area that is well ventilated and provides access for future maintenance
• Place the unit on a level stable work surface capable of supporting its weight
• Please consult national and local standards to ensure that your unit is positioned in accordance with any existing requirement
• At the end of the appliance’s working life, make sure it is scrapped & components recycled properly
• Current environmental protection laws in the state/country of use must be observed
• Doors must be removed before disposal
• Power supply cable must be removed before disposal
• For further information on the recycling of this product, contact the local dealer/agent or the local body responsible for waste disposal