Due to continuous product research and development,
the information contained herein is subject to change without notice.
Page 9
www.stoddart.com.au
Preparation
Unpacking
Remove From Crate
Remove the Power Soak from the shipping crate� Sharp staples and nails are used to crate the machine and care must be taken in handling
boards and cardboard to keep from creating a puncture or injury to people or the equipment� Discard the crating materials in an appropriate
disposal area or container�
Inspect the sink and packages to be certain that there was no damage created by the shipping company� If there are signs of shipping
damage, contact the shipping company before proceeding�
Remove the packages from the Power Soak tank and locate the box labelled “OPEN FIRST”�
This box will contain the fasteners and sealant that will be required for assembly of the Power Soak�
Locate the box
labelled
“OPEN FIRST”
to find fasteners and
sealant used for the
installation