Electrical characteristics
STM32F031x4 STM32F031x6
58/113
DocID025743 Rev 3
High-speed external clock generated from a crystal/ceramic resonator
The high-speed external (HSE) clock can be supplied with a 4 to 32 MHz crystal/ceramic
resonator oscillator. All the information given in this paragraph are based on design
simulation results obtained with typical external components specified in
application, the resonator and the load capacitors have to be placed as close as possible to
the oscillator pins in order to minimize output distortion and startup stabilization time. Refer
to the crystal resonator manufacturer for more details on the resonator characteristics
(frequency, package, accuracy).
For C
L1
and C
L2
, it is recommended to use high-quality external ceramic capacitors in the
5 pF to 20 pF range (Typ.), designed for high-frequency applications, and selected to match
the requirements of the crystal or resonator (see
). C
L1
and C
L2
are usually the
same size. The crystal manufacturer typically specifies a load capacitance which is the
series combination of C
L1
and C
L2
. PCB and MCU pin capacitance must be included (10 pF
can be used as a rough estimate of the combined pin and board capacitance) when sizing
C
L1
and C
L2
.
Note:
For information on selecting the crystal, refer to the application note AN2867 “Oscillator
design guide for ST microcontrollers” available from the ST website
www.st.com
.
Table 33. HSE oscillator characteristics
Symbol
Parameter
Conditions
(1)
1.
Resonator characteristics given by the crystal/ceramic resonator manufacturer.
Min
(2)
Typ
Max
(2)
2.
Guaranteed by design, not tested in production.
Unit
f
OSC_IN
Oscillator frequency
-
4
8
32
MHz
R
F
Feedback resistor
-
-
200
-
k
I
DD
HSE current consumption
During startup
(3)
3.
This consumption level occurs during the first 2/3 of the t
SU(HSE)
startup time
-
8.5
mA
V
DD
= 3.3 V,
Rm = 30
,
CL = 10 pF@8 MHz
-
0.4
-
V
DD
= 3.3 V,
Rm = 45
,
CL = 10 pF@8 MHz
-
0.5
-
V
DD
= 3.3 V,
Rm = 30
,
CL = 5 pF@32 MHz
-
0.8
-
V
DD
= 3.3 V,
Rm = 30
,
CL = 10 pF@32 MHz
-
1
-
V
DD
= 3.3 V,
Rm = 30
,
CL = 20 pF@32 MHz
-
1.5
-
g
m
Oscillator transconductance
Startup
10
-
-
mA/V
t
SU(HSE)
(4)
4.
t
SU(HSE)
is the startup time measured from the moment it is enabled (by software) to a stabilized 8 MHz
oscillation is reached. This value is measured for a standard crystal resonator and it can vary significantly
with the crystal manufacturer
Startup time
V
DD
is stabilized
-
2
-
ms
微可Vicor——值得信赖的元器件供应商
http://www.vicor.top/
021-31660491
微可Vicor——值得信赖的元器件供应商
http://www.vicor.top/
021-31660491
