STMicroelectronics STM32 Cortex-M3, Manual

Page: 27 / 60

3.8 Configuring the Target
1 Intro
2 Electrocardiogram ( Ecg ) Signals
The Electrocardiogram (
Ecg
)
•
Ecg
: electrical manifestation of heart activity recorded
from the body surface
•
monitoring of heart rate
The
Ecg
signal can be recorded fairly easily with surface
electrodes placed on the limbs and/or the chest, see pages 6 – 16
below.
Josef Goette 2 2009
3.8 Configuring the Target
After the simulation on the computer we know that our program works and in case of errors
we have corrected them. Now there is need of configuring the linker and the debug utilities.
Therefore quit the debug mode first. Klick first on the icon 1 according to Figure
3.11 . You already
know the appearing window. Now click on New Project Target , name it STM32H103 and click OK.
Select now the created target on the left side of the icon 1. Klick now on the icon 2 according to
Figure
3.11 .
!
The processor won’t run if is not configured as shown in the Figures 3.11 - 3.15 !
Go to the tab
Debug
and select Use:
Your JTAG Adapter
. In the tab
Utilities
select
Use Target Driver
for Flash Programming: Your JTAG Adapter . Click on Settings and there on Add . Select STM32F10x
Med-density Flash
2
and click Add and twice OK .
Figure 3.8:
Options for Output
Figure 3.9:
Options for Listing
Figure 3.10: Options for Linker
2
In µ Vision before version 3.7 select STM32F10x 128kB Flash
Lukas Kohler 19