7 |
P a g e
© 2 0 1 9 s t m c a n n a v 1 . 6
TOUCH SCREEN OPERATION
2 Methods of Operation:
Automatic 3- Stage Cycle Mode
The RocketBox ships with a factory preset setting for filling cones. This preset is comprised of 3
stages. Each stage has a pre-determined level of vibration and timing. The factory preset setting is a
base setting to help get you started. Each stage can be adjusted to suit your needs.
Manual Mode
You can also operate the RocketBox in Manual Mode. Manual Mode is a single stage mode operating
for a specific period of time. You have complete control over every setting.
___________________________________________________________________________
Each Stage Can Be Customized By:
•
Desired power of vibration motor
•
Desired PSI for pneumatic leveling system
•
Desired time for each stage
_____________________________________________________________________________
STAGE 1:
Filling Stage
The material is placed onto the top tray and begins to fill the cones.
STAGE 2:
Packing Stage
This stage ramps up the machine power to pack the joints.
STAGE 3:
Final Pack/Dampening Stage
With trays and cones still suspended inside the machine, the dampening motion mimics
tapping the cones on a table for a final pack.
