Stiroplus SP2020, Manual

Page: 18 / 22

1) Do not touch hot soleplate at any time before cooling down!
2) Never direct the steam at people!
3) Do not activate the steam function when the iron is placed on the unit base to avoid being
scalded by steam.
10. After ironing, r emove the plug from the wall socket, the appliance will be turned off and
all the indicators will extinguish, then unplug the appliance. The soleplate is still hot,
never touch it with hand, place it on the thermal insulation stand until it cools down
completely.
CLEANING AND MAINTENANCE
Before cleaning, firstly disconnect the power outlet and let the appliance cools down.
1. Wipe the residues and any other deposits on the soleplate with a damp cloth or a non-
abrasive (liquid) cleaner.
NOTE: Do not use chemical, steel, wooden or abrasive cleaners to scrape the soleplate.
2. Clean the upper part of iron with a soft damp cloth. Wipe the water drop on the unit base
and the thermal insulation stand with dry cloth.
3. Remove the water tank, upend the unit base and put it on a flat surface. Then anticlockwise
rotate the knob at the bottom of unit base. to remove it (see Fig.1) .
WARNING: To avoid a risk of scald, make sure the appliance has been cooled down
completely before removing the knob.
4. After finish cleaning, tighten the knob and restart the appliance, then press the “OK” reset
button, the steam generator can work normally again.
5. When the appliance is not used for a long time, empty the water in the reservoir, turn the
temperature dial to the minimum setting and store the steam supply hose and power cord at
the cord clips. Then put the appliance at a place out of the reach of children.
Fig.1