Stiroplus SP2020, Manual

Page: 14 / 22

Filling aperture
Grasp the water tank handle and lift the water tank lock upwards to pull out the water tank,
then fill water tank with water through the filling aperture. Make sure that the water shall
not exceed the MAX mark of water tank.
Temperature dial/IntelliTemp
Turn the temperature dial to IntelliTemp setting to iron all kind of fabrics. For extremely hard
creases, turn on Max.
Temperature indicator
When the iron is heating up, the temperature indicator will illuminate. Once the iron has
reached the selected temperature, it will extinguish. The temperature indicator will be cycled
on and off as the iron maintains the selected temperature during heating.
Steam trigger
When the appliance is heated to the selected temperature and the indicator of selected
steam rate lights solidly, press the steam trigger with a little force, the steam will be sprayed
from the soleplate. When loosen the steam trigger, the appliance can only be used for dry
ironing without steam.
ON/OFF button
Press the ON/OFF button, the appliance enters into working condition, at that time, the
power indicator illuminates in red. To turn off the appliance, hold and press the ON/OFF
button for about 2 seconds.
Steam toggle button / ECO function
The appliance can switch between MAX and ECO steam rates by the steam toggle button.
Steam toggle button
ON/OFF button
"OK” reset button
MAX steam rate indicator
ECO steam rate indicator
Descaling indicator
Refill indicator
Power indicator