Stiroplus SP1070, Instructions For Use Manual

Page: 16 / 20

BEFORE FIRST USE
1. Remove any sticker or protective foil from the soleplate.
2. Fill the water tank with water and heat up the iron at the maximum temperature, and then
iron over a piece of damp cloth for several minutes for the purpose of removing any residue
on the soleplate according to the section of “ Steam ironing ”.
NOTE
：
1) It is normal that strange odor comes out from the unit for the first use. This will cease
after a short while.
2)
Some particles may come out of the soleplate when you use the iron for the first time.
This is normal; the particles are harmless and stop coming out of the iron after a short
while.
3)
When you activate the “ Steam ” function, the appliance may produce a pumping sound.
This is normal; the sound tells you that water is pumped into the steam generator.
4)
During the heating process of the soleplate, there will be little steam coming out from
the
soleplate automatically and this phenomenon will continue for about 3 seconds, This is
normal.
5)
There will be little condensation water in the steam supply hose after first use.
But in the second use, the condensation water will be sprayed out together with the
steam at the beginning of releasing steam. This phenomenon will continue for several
seconds. This is normal.
USING YOUR STEAM STATION
The appliance has two ironing ways. You can use dry ironing or steam ironing, the details
refer to the following.
Dry ironing
1. Put the iron on the thermal insulation stand of unit base.
2. Connect the plug to wall outlet, one beep can be heard, then turn the temperature dial to
select your desired temperature setting, which is depended on the fabric of garment.
Refer to
“ IRONING TIPS ” and “ ADDITIONAL TABLE ” as below when select
temperature.
3. Press the ON/OFF button, the power indicator illuminates, the temperature indicator and
ECO steam rate indicator illuminate, then the iron starts heating.
4. When the temperature of soleplate reaches the selected temperature, the temperature
indicator turns off, and you can start ironing now. Refer to “ IRONING TIPS ” and
“ ADDITIONAL TABLE ” as below when ironing.