11
AFTER SALES SUPPORT
1300 886 649
AUS
MODEL: HS-2H1-001 PRODUCT CODE: 51024 09/2015
Charging the appliance
• Connect the battery charger to a mains socket and insert the DC connector
into the charging socket at the underside of the cradle/stand. Feed the cable
through the cable channel on the charging socket so that the cradle is not
resting on the cable.
• Position the cradle/stand close to a mains socket, well away from heat
sources and excessive moisture.
• Place the complete vacuum cleaner (frame with the handheld unit attached)
onto the cradle. The charge indicator light at the front of the handheld unit
illuminates red. When the appliance is fully charged, the light will illuminate
green.
CAUTION!
Ensure the appliance is switched off before starting to charge the batteries.
Getting Started (Cont.)
Fig. 1
=
Fig. 2
Assembly and disassembly
Your new Rechargeable 2-in-1 Vacuum Cleaner can be used as a handheld unit or
as an upright vacuum cleaner with the handheld unit assembled into the frame.
• To connect the handheld unit into
the frame for use as an upright
vacuum
, insert the tip of the handheld
unit into the opening in the handheld
unit recess. Then press the grip of the
handheld unit into the handle until it
clicks securely into position (Fig. 1).
• To remove the handheld unit from
the frame for use as a handheld
unit
, press the handheld unit release
button at the back of the frame. Then
pull the handheld unit up and out of its
recess in the frame (Fig. 2).
• To fold down the handle for
convenient storage
, press the handle
release latch at the back of the frame
and fold down the handle.
