15
AFTER SALES SUPPORT
1300 886 649
AUS
MODEL: HS-2H1-001 PRODUCT CODE: 51024 09/2015
Other Useful Information (Cont.)
Storage
• Storage environment:
Store the appliance in a dust-free and dry location,
out of children's reach. Storing it in its original carton will protect it from dust.
• For convenient upright storage,
store the appliance, fully assembled, on
the cradle/stand. We recommend you leave the battery charger connected to
the cradle/stand and a power point so the unit can recharge when not in use.
• You can store the crevice tool and brush nozzle at the back of the cradle/
stand in their respective holders.
• For compact storage
, fold down the handle, as described on page 11.
Fig. 4
Cleaning the appliance and attachments
If the appliance needs cleaning, wipe it with a damp cloth. Add a mild detergent
to the cloth, if required to remove stubborn dirt. Ensure that the appliance is
completely dry before the next use.
If the tools require cleaning, use a slightly damp cloth and/or a small brush (such
as an old toothbrush) to clean the crevice nozzle and brush attachment.
Cleaning the rotary brush
The rotary brush is located at the underside of the floor brush. Larger dirt and
dust residues, hair and threads can become caught in the brush, which can
block or jam the suction mechanism and affect dirt removal. It is therefore
important that you regularly check the state of the brush and clean it when
required.
• Turn the floor brush upside down.
• Push the catch on the cover plate to
the rear so that you can remove the
cover plate (Fig. 4).
• Lift out the rotary brush and clean it.
• To replace the rotary brush, first push
the broad end onto the drive shaft so
that the rotary brush hooks into place.
• Then push the other end into the
mount so that the rotary brush sits
straight in the floor brush.
• Replace the cover plate and fasten it
firmly into place.
NOTE:
The LED lamps are maintenance-free and cannot be changed.
