12
AFTER SALES SUPPORT
1300 886 649
AUS
MODEL: HS-2H1-001 PRODUCT CODE: 51024 09/2015
Instructions
IMPORTANT!
• Blockages:
Make sure the suction opening is always open and unblocked.
Blockages lead to overheating and damage to the motor.
• Shag pile carpet:
Do not vacuum shag pile carpet with the floor brush. The
rotary brush can get caught in the carpet and block.
• Parquetry:
Before upright vacuuming highly polished parquetry surfaces,
test the appliance on an inconspicuous area to ensure suitability.
• Filters:
Ensure both the dust and coarse filters are in place before vacuuming.
• Recharging:
As soon as the suction power of the appliance begins to
diminish noticeably, connect the appliance to the charger.
Upright vacuuming
The handheld unit fits securely into the frame of the vacuum cleaner. Before you
use the vacuum cleaner in an upright position to vacuum floors, make sure the
handheld unit is properly fitted into the frame and the unit is sufficiently charged
(see page 11).
• Attach the handheld unit into the frame as described on the previous page. If
the handle is folded down, press the handle release latch at the back of the
frame and pull up the handle.
• Start the vacuum cleaner by pressing the On/Off switch on the upper handle.
The two LED lamps at the front of the floor brush will illuminate and the
rotary brush will start turning.
• Guide the floor brush over the area to be vacuumed. Hold the grip so that the
floor brush moves smoothly over the floor.
• Press the On/Off switch when you have finished vacuuming. The rotary brush
will stop and the LED lamps go out.
Handheld vacuuming
The handheld unit is designed for convenient vacuuming of furniture, stairs, the
car interior or any areas that are more difficult to access with an upright vacuum
cleaner. Before you use the handheld vacuum cleaner, make sure the unit is
sufficiently charged (see page 11).
• Remove the handheld unit from the frame as described on the previous page
.
• If required, attach the crevice nozzle or the brush attachment to the opening
at the front of the handheld unit.
• Start the vacuum cleaner by pressing the On/Off switch.
• When you have finished vacuuming, press the On/Off switch again.