Stinger HEIGH10
®
Radio Replacement Kit
for 2011-2018 Jeep Wrangler JK
SR-JK11H
© 2021 AAMP Global. All rights reserved. PAC is a Power Brand of AAMP Global.
AAMP Global is not affiliated with FCA US LLC. Jeep® is a registered trademark of FCA US LLC. The terms
OEM, Jeep®, Wrangler®, and Gladiator® all terms are used strictly for identification purposes only. It is not
implied that any part listed is a product of, or approved by, Fiat Chrysler Automobiles.
Pacific Accessory Corporation
Page 5
Rev: V1
Date:031021
®
Section 2: In-Vehicle Harness Connections and Preparation (cont.)
Part One: Dual USB Extension (SSUSB2) (cont.)
Step 4
Step 5
Reconnect and reinstall the
climate control panel. Route the
two USB cables up to the radio
opening, making sure to route
them behind the metal bracket.
Install the optional USB cover and
feed the USB cables through the
front of the panel. Secure with the
flanged nut and then lock with the
lock nut.
Step 1
Part Two: GPS Antenna
Step 1
Step 2
Step 3
Clean the indicated area above
the right side of the instrument
cluster.
From the HEIGH10 box, stick the
metal plate to the surface and
place the magnetic GPS antenna
on the plate.
Route the blue GPS connector
behind the metal bracket and into
the radio opening. Bundle and
secure the excess antenna cable
behind the instrument cluster.
The GPS antenna is required for proper operation of Apple CarPlay and Android Auto, in addition to the optional GPS if
installed. The GPS antenna and mounting plate are included in the HEIGH10 hardware.
